Pizza turned out the way I imagined it would

With free tomatoes from the donation table, I decided when I got back from my activities on Tuesday, I would make pizza. Well, I had to recover & wait until Wednesday for the pizza to happen, but it turned out as I thought it would!

Yeast raised dough from my bread machine, low sodium pasta sauce seasoned with Adobo, Basil, Oregano, Thyme, & Garlic powder. Shredded Queso, thick sliced Pepperoni, sliced small round tomatoes I got for free, 1/2 diced onion, sprinkled with some Adobo before baking & grated Parmesan afterwards, with a bit of butter rubbed on the edge crust & allowed to cool.

The best thing is I didn't use a lot of the sauce because then it would be too wet at the end. And I probably used 1/2 cup shredded Queso - it was whatever I had left in the bag, but it covered the sauce well enough. 10 minute pre-bake after rolling out the dough at 400 F, 15 minute bake at 425 F topped. It came out nicely & a bit crispy. I used a recipe which called for olive oil & only 2 cups of flour. I wanted to save on flour for this one & this dough spread out on my large cookie sheet just fine. Next time I might add grated Parmesan during the kneading. 

And I had 1/3 of it left for breakfast. Cold pizza is da bomb! It also smelled so nice baking & afterwards.

A couple Christmas Card Recipes

Checking the mail room had a few items on a donation table & 2 Christmas cards had recipes. I took pictures so others may claim them, but in the meantime, I transcribed the handwriting for this post.  

Pesto Chicken

1. Lay chicken tenders in oven safe dish.
2. Cover with pesto.
3. Cover with shredded cheese.
4. Cover with sun dried tomatoes.
5. Bake at 375 F for 30 minutes. Enjoy!

Beef Stroganoff 

1. Chop 2-3 onions. Separately chop mushrooms & 3-4 cloves garlic.
2. With 2 tablespoons of butter, sautee onions on medium-low heat.
3. When onions are translucent, add mushrooms & garlic and a dash of Worcestershire. Sautee & set aside.
4. In a deep pan, add beef & another 2 tablespoons of butter.
5. Sautee on medium until meat is browned.
6. Dust with flour.
7. Add onions, mushrooms, & garlic mixture to meat.
8. Add 2 tablespoons of Worcestershire and salt & pepper.
9. Simmer until mixture is a thick gravy.
10. Remove from heat and 3-4 dollops of sour cream. Enjoy over egg noodles!

Mondays aren't too bad for shopping, I guess

MONDAY... I went shopping at the Route 62 Walmart hoping they would have some things Alliance didn't, like the DiRusso patties, and..  I got my answer on that separately.

Meanwhile, I hadn't been in that Walmart for a few months & holy crap they moved around that store, too!! Like what the hell? I say they do this to confuse shoplifters.

Pet food moved to the back instead of off to the right of the pharmacy. Personal care & medical related stuff occupies that now. Toys were moved as well. Then they put some sort of fashion highlight stage in the middle of the clothing section like they're trying to be like the mid to high end stores they competed out of business against... which disrupts the walking flow.

Was hoping to grab another bag of Halloween candy but did not. Did find Con Azafran though!! 1st time finding it! I'm also getting an idea on where Pepitas are stocked & found those, too. They moved Dairy around, cookies, & snack chips like Cheezits were moved. Bread was moved. Cereal aisle completely flipped. Some places remained the same because they kind of have to. Couldn't find any 3 pound turkey breast roasts... Maybe not until November?

Also they're bringing in these new center coffin freezers which have more windows on the sides. But now with sliding doors which some people can't be arsed to close after they're done looking. Saw that happen more than once.

It was a good trip to visit another store for once. I made an effort. And I got 2 more zany Crimmas ornaments! The display wasn't as elaborate as the Alliance Walmart but still found a couple.

I once had an idea, then I got a better one

And in the span of about 2 hours, I have effected a better fix for my bed in regard to ribs which keep falling out. 3/8 inch bolts Grade 8 bought yesterday at Lowe's where I made a sizeable purchase of supplies.

The plan was to buy 12 8 inch long 3/8 inch bolts Grade 8 (decently strong! from info I had searched) & with a metal rated 3/8 inch drill bit, punch holes through the bed frame & slide them through & into the ribs which were 3/8 inch hollow. And that plan pretty much held through! I fixed the 2 most annoying ribs, including the 1st one which I had slapped a ton of Gorilla Tape on & was more or less still in place. But finally I had a better idea. The fix I put in place at the time was born in the middle of the night with the idea of getting the heck back to sleep & maybe for the past year worked well enough.

Lowe's didn't have 12 8 inch bolts but 4 3 inch ones... But I also got 6 8 inch 3/8 inch bolts of a lesser grade. Don't know how strong they are, but hopefully if I need to replace the ones now in use, they'll do until I get the 8 inch bolts.

The idea was to make it impossible for the ribs to fall out when parts of my bed frame somehow twist & bend & allow ribs to fall out of their U shaped catch supports. Punch a hole through, shove in a honking long strong bolt, & be done with it. It's a design oversight. Bad engineering.

IT'S TOO CUSTOM

Spent $128 at the hardware grocery store Lowe's. They refused to cut a sheet of wood for me saying it's "too custom." I got supplies for a few projects. Fixing my bed frame, strengthening my (not) Ikea bookshelf, fixing a storage box lid, and a craft project - making a drawer missing from a desk. My grandfather made the toy box when I was 5 and the lid broke practically in the 1st year of having it. And the missing desk drawer fell apart like over 40 years ago for some reason. During COVID I measured another intact drawer to see what it would need to make one. Now I just need to get the wood cut.

 

Dr. Demento Retired

I discovered Dr. D from records I bought while in Columbus in the mid 80s & then after coming back home found his show on late night radio on Sundays. I would get cassette tapes & record them... followed him from one radio station to another... & then suddenly he was off the air locally & then off the air period. Westwood One & On The Radio Broadcasting syndicated the show but for some reason refused to offer a list of stations carrying Dr. D. Like they didn't want anyone to listen & it was up to the fanbase to report in. Eventually he went online when he really deserved a satellite radio channel. Musical comedy & spoken word comedy along with offbeat unreleased tapes, rare 78s... His record collection is so massive, when he finally moved the floor in the rooms he had it in were discovered to be sagging! Dr. D is a rare one. Whatever happened to the movie someone was making about him?

Accomplished

I accomplished 3 things digitally yesterday:

1. Searching for liner notes on the Terrorvision Rockafire Explosion release, I ran across a listing of the vinyl edition on eBay by none other than Creative Engineering himself, Aaron Fechter! It was $700 & he sold 8 of them before it was Sold Out (which included a 2 hour tour package) - and in the gallery of images with the listing was clear images of the liner notes booklet, covers included! I grabbed them with plans to print a CD sized booklet which should have been included anyway!! I didn't really need character photos or a gatefold poster.

2. Managed to download 2 different PDFs of the October 2025 Previews order catalog... One was 20 mb & the other was much larger. Previous 2 files were almost 250mb.

3. Got Google's AI search assistant to produce a recipe for lentils in the crockpot which is much like the recipe I used months ago when I got all those bags & then somehow lost it! I don't know how it got lost when I made it over & over for like 3 months!!

DIY Laser Pointer

Tired of buying cheaply made laser pointers off eBay which go bad faster than old milk, I decided to buy the parts & improve on them.

1. AAA battery boxes with good electrical connections instead of using metallized paint to conduct current.

2. Separately connected laser diode bought in pack of 10 made for a 3V power source.

3. Only thing reused from last broken pointer was the push button switch.

Now I need a sturdy casing for this. If the diode goes bad, I have 9 more to replace it with. And yes, Poofball has missed his red dot.

I was declared CLEAR.

Had an interesting visit (announced) by Akron Pest Control. Got to me around 11:30. 3 guys show up armed with flashlights. Start looking, asking about if I'd seen any mice. Had me get off the gray chair & soon it dawns on me they're not here to replace bug traps or preventative spray. They're checking for other bugs. Bedbugs. I've been clear of them for at least 3 or 4 years now. I explain to them how that happened & maybe I should have gotten a new mattress when I moved up here.

They check the red chair & it's clean. I never thought to check the gray chair... Guy flips it over & there's signs they got under the one cushion but it's all dead. And my reaction is at first "oh shit" then "oh I didn't think to check there."

MEANWHILE, as 2 guys are distracting me, the 1 guy who went to check the bedroom proceeds to rip nearly all my bed stuff off my mattress without warning or saying he was going to. I WOULD HAVE LIKED A WARNING! Because even if they were doing their job, coming back into my bedroom & seeing a naked bed was alarming & irritating (having to put things back was irritating).

I think same guy checked out my closet... 😀 one guy had to comment about the maid outfit.

But in the end, I was proclaimed Clear of bugs. It helps I found the UV LED bug catcher on Saturday & managed to finally deal with those annoying sink flies. They confirmed with me I knew how to recognize signs of those bugs & oh yes, I certainly knew... 😰

And with the relevation of the chair cushion, I made sure to unscrew & remove it, vacuum what that 1 guy found, spray down with bed bug killer & 91% alcohol, & reglue the bottom paper back on. Chair cleaned. It's a good thing I had done all that other cleaning for stuff, like under 1 bookcase a few months ago.

Maybe now I can ask for reinstating of my laundry room privileges. 

Creamy Shicken & mushrooms with rice (not a recipe)

Today's feast from the crockpot was inspired by last week's Foosebook Memory of Creamy Chicken & Mushrooms with rice. Though with changes & maybe not the same recipe.

I bought mushrooms a couple weeks ago for this & a pack of shicken only to swap it for a pack I already have here since June & starting to look freezer burned. Which was cool since it was 2 breasts at 1.22 pounds.

Anecdotes for this recipe: I had to make my own Cream of Mushroom Condensed soup to hopefully keep the sodium down (although the main overall recipe had something...). And my milk was the mixed up nonfat dry. But it still thickened in the pot!

The other bit was needing a pouch of dry onion soup mix - which in the past I use for Lazy Onion Bread. It was only after opening the Aldi product box which I noticed it's been here so long, tiny bugs tried their best to infiltrate inside the sealed box & THEN when they did tried to eat through the paper for the pouch! This whole operation ultimately failed & signs of devastated civilizations were left in its wake.

Everything mixed up & put in the crock & on high for 4.5 hours. I plan to add 1/2 cup of rice 1 hour before done & check to see if the chicken will shred as the recipe says. Though I used to make this for mom & bake it instead. No shredding.